Faheem Iqbal
Good Replacement Cartridge
VOOPOO VMATE V4 cartridge ki packaging achi thi. Product proper condition mein receive hua aur The Vape Town se order ka experience smooth raha.
The Vape Town
Voopoo Vmate Cartridge V4 Replacement Pods – Best Price in Pakistan A good pod kit is only as good as the pod you put in it. The Voopoo...
SKU
A good pod kit is only as good as the pod you put in it. The Voopoo Vmate Cartridge V4 is the newest refillable cartridge in the Vmate family, and it brings a bigger 3ml capacity, easy top filling, a snap-on magnetic fit, and a new leak-control design. It also adds a 1.0Ω option for vapers who like a tight, cigarette-style draw.
In this guide, we'll cover what the V4 pod offers, how the three resistances differ, which devices it fits, and how it compares to older Vmate pods and to pods from other kits we stock. You'll also find where to buy genuine Vmate V4 pods at the best price in Pakistan.
The Vmate Cartridge V4 is a replacement pod with a built-in coil. When the flavor fades or the coil wears out, you swap the whole pod. There's no coil building, no cotton, and no mess.
It's the latest generation in Voopoo's Vmate pod line. It was launched alongside the Vmate Max 2 pod kit, which ships with 0.4Ω and 0.7Ω V4 pods in the box. The pod holds 3ml of e-liquid, fills from the top, and clicks into the device magnetically.
Here's what makes this pod stand out.
A 3ml tank means fewer refills through the day. That's a big plus if you vape often and don't like stopping to top up.
You fill the pod from the top, without pulling it out of the device. It's faster, cleaner, and easier than side-fill designs.
The pod snaps onto the device with a magnetic fit. It stays secure in your pocket, and swapping pods takes a second.
The V4 comes in 0.4Ω, 0.7Ω, and 1.0Ω, so you can pick the draw that suits you. We explain each one below.
Voopoo promotes a new "Liquid-Seal Shield," an improved bottom airflow path, and a full-wrap cotton structure. In simple terms, the pod is designed to wick e-liquid better and leak less. Voopoo's lab figures claim up to 90ml of e-liquid and around 30 days of clean use with the 0.7Ω pod. Real life will vary with your e-liquid, how often you vape, and your power level, but these design goals point to a pod built to last.
The pod body is made from PCTG, a tough, clear plastic that resists cracks and lets you see your e-liquid level.
Voopoo recommends the V4 for nicotine salt e-liquids up to 50mg. That makes it a natural fit for MTL and lighter RDL vaping.
|
Specification |
Detail |
|
Product |
Voopoo Vmate Cartridge V4 |
|
Type |
Replacement pod with built-in coil |
|
Resistances |
0.4Ω / 0.7Ω / 1.0Ω |
|
Capacity |
3ml |
|
Fill Type |
Topside fill |
|
Connection |
Magnetic |
|
Pod Material |
PCTG |
|
Recommended E-Liquid |
Nic salt, up to 50mg |
|
Pack Size |
Usually 3 pods per pack (some retailers sell 2 pods) |
Each resistance is built for a different style. Here's a simple guide.
|
Resistance |
Draw Style |
Best For |
|
0.4Ω |
Looser, warmer, more vapor (RDL) |
Vapers who want bigger clouds and a warmer hit. Needs a higher-power device. |
|
0.7Ω |
Balanced between MTL and RDL |
Most vapers. A good mix of flavor, airflow, and battery use. |
|
1.0Ω |
Tighter, cigarette-style (MTL) |
Former smokers and vapers who like a restricted inhale and lower power use. |
This is the most vapor-focused option. It's built for a looser RDL draw. Always check your device's supported power range before using it, because Voopoo notes that the 0.4Ω pods in the Vmate range need around 30W of output.
If you're not sure which to buy, start here. It balances flavor, airflow, and power use, and it works well for most MTL and light RDL vaping.
This is the new addition in the V4 range. It gives a more restricted, cigarette-like inhale and tends to stretch your battery a bit further.
The V4 is designed for the newest Vmate devices, such as the Vmate Max 2 (2100mAh battery, 5–30W output, 0.85-inch hidden screen), which ships with V4 pods.
Different Vmate generations use different pods, so don't assume every Vmate device takes V4 pods. Before you buy, check your device model against its pod generation (V2, V3, or V4). If you're unsure, message our team on WhatsApp with your device name, and we'll tell you exactly which pod fits.
Here's how the V4 compares to older Vmate pods and to pods from other kits we stock.
|
Feature |
Vmate V4 |
Vmate V3 |
Vmate V2 |
Argus Multi-Ohm (Argus Z3) |
OXVA UNITECH 3.0 (NeXlim 2) |
|
Fill Type |
Top fill |
Top fill |
Side fill |
Top fill |
Top fill |
|
Capacity |
3ml |
3ml |
2–3ml (varies by listing) |
3.5ml (2ml in some regions) |
Varies by version |
|
Resistances |
0.4Ω / 0.7Ω / 1.0Ω |
0.4Ω / 0.7Ω / 1.0Ω |
0.7Ω / 1.2Ω |
Two coils in one: 0.7Ω and 1.0Ω |
0.6Ω / 0.8Ω (plus others) |
|
Connection |
Magnetic |
Magnetic |
Plug-in |
Magnetic |
Magnetic |
|
Leak Design |
Liquid-Seal Shield, full-wrap cotton |
Multi-layer leak-proof |
Basic |
Multi-core electrode design |
UNITECH 3.0 chamber |
|
Best For |
Latest Vmate devices |
Earlier Top-fill Vmate kits |
Original Vmate kits |
Argus Z3 and Argus family |
NeXlim 2 and UNITECH 3.0 kits |
The V3 is also top-fill with the same three resistances. The V4 adds Voopoo's newer leak-control structure and was designed for the Vmate Max 2. If your device takes V3 pods, stick with V3. If it takes V4, use V4.
The V2 is the earlier side-fill design, offered in 0.7Ω and 1.2Ω. The V4 is easier to fill, holds more, and adds lower and higher resistance options.
The Voopoo Argus Z3 Pod Kit uses a different pod family. Its Multi-Ohm pod has two coils (0.7Ω and 1.0Ω) in one pod, switched by rotating the pod. Vmate pods are a separate system, so they are not interchangeable with Argus pods.
OXVA kits like the NeXlim 2 use their own UNITECH 3.0 pods. These don't fit Vmate devices either. Pods are brand and family specific, so always match the pod to your device.
This is the pod your device was built for. Keep a few spares so you're never caught without one.
Top fill and magnetic connection make these pods simple to use all day.
If you vape nicotine salts at up to 50mg, the V4 is a good match.
Vapers whose device doesn't use V4 pods. Check compatibility first.
Vapers who want to use thick, high-VG freebase juice. For that, you'll want a sub-ohm setup, like our Voopoo Uforce X Tank or Vinci Spark 220 Kit.
Snap the pod onto the device. The magnet pulls it into place.
Open the top fill port and add your e-liquid. Stop below the max line, and press the port closed firmly.
Wait three to five minutes before your first puff. This lets the cotton soak up the liquid and helps prevent a dry or burnt hit.
Choose a power level within the range your pod and device support. Start low, then adjust to taste.
When the flavor gets dull or tastes burnt, swap in a fresh pod. Don't wait until it's completely dead.
Prices for replacement pods can change with store, stock, pack size, and whether the pods are genuine. At The Vape Town, we keep our pricing competitive and only stock 100% authentic Voopoo products, so you never pay for a fake or clone pod.
Prices can shift with new stock and seasonal deals, so the live product page always shows the most accurate and current price. Check it before you order to see the latest price and pack size.
To explore more devices and accessories, browse our full Kits & Mods collection.
Fake pods are common, and they can leak, taste burnt, or damage your device. Every pod we sell comes from verified suppliers.
We deliver across Pakistan, including Karachi, Lahore, Islamabad, and smaller cities. Most orders are processed quickly.
Not sure which pod fits your device? Our team is easy to reach on WhatsApp for quick, honest advice.
Alongside pods, we stock kits and mods, tanks, nic salts, and e-liquids, so you can restock everything in one order.
Use nicotine salt e-liquid, up to 50mg. It gives a smooth throat hit and works well with the pod's resistance range. Browse our nic salt collection for flavors to try, or our full E-Liquids collection.
Very thick, high-VG juice isn't a good match for these pods. It can wick slowly and cause dry hits.
Keep at least one or two spare pods on hand. Running out mid-day is no fun.
Use 0.4Ω only on devices that support its higher power needs. Use 0.7Ω or 1.0Ω on lower-power setups.
Very sweet e-liquids can gunk up a coil faster. If you vape sweet flavors, expect to swap pods a little sooner.
Fill below the max line to reduce leaks and gurgling.
Keep pods and devices out of direct sunlight and hot places.
Keep it out of reach of children and pets.
Store it in a cool, dry place away from direct sunlight.
Avoid use if you are pregnant or have health conditions affected by nicotine.
This product is intended for adult smokers and vapers of legal age only.
Always check the nicotine strength of your chosen e-liquid before use.
It's the newest replacement pod for the Vmate family. It has a built-in coil, a 3ml capacity, top filling, and a magnetic fit.
0.4Ω, 0.7Ω, and 1.0Ω.
The 0.7Ω is the best all-rounder. Choose 1.0Ω for a tighter MTL draw, or 0.4Ω for a warmer, more vapor-focused vape on a higher-power device.
The Vmate Max 2 is designed for V4 pods. Other Vmate devices may use V2 or V3 pods, so check your model first, or message us on WhatsApp.
Voopoo recommends nic salts up to 50mg. Thin freebase may work in some cases, but nic salt is the best match.
Voopoo's lab figures suggest up to around 90ml of e-liquid with the 0.7Ω pod, but real life varies with your e-liquid, vaping habits, and power level.
No. Each brand and pod family is separate. Always match the pod to your device.
Yes. We only stock genuine Voopoo products from verified suppliers.
If your device takes V4 pods, there's no reason to look elsewhere. You get easy top filling, a secure magnetic fit, 3ml of capacity, and a leak-control design built for longer, cleaner use. The three resistances cover everything from tight MTL to warm, vapor-heavy RDL.
Keep a couple of spares, pick the resistance that matches your device and your draw, and you're set. If you're not sure which pod fits, just message us.
Ready to order? Check the full listing, pack size, and current price on our Kits & Mods collection page, or message our team on WhatsApp if you have questions before you buy.
out of 5, based on 10 reviews
100% would recommend it
Faheem Iqbal
VOOPOO VMATE V4 cartridge ki packaging achi thi. Product proper condition mein receive hua aur The Vape Town se order ka experience smooth raha.
Ahsan Jamil
VMATE V4 cartridge ka top-fill design convenient lagta hai. Product ki presentation achi thi aur packaging secure thi.
Waqar Hussain
Cartridge proper packing mein receive hui. The Vape Town ki service ka overall experience acha raha.
When: October 7, 2026
Good Cartridge Design
October 6, 2026
Convenient Replacement
October 5, 2026
Top-Fill Design
October 4, 2026
Daniyal Ashraf
VOOPOO VMATE V4 cartridge achi condition mein receive hui. Packaging neat thi aur product ka design bhi acha laga.
Kashif Rauf
VMATE V4 cartridge ka design simple aur practical hai. Product ki packaging secure thi aur order ka experience satisfactory raha.
Shahid Iqbal
Replacement cartridge proper condition mein mili. The Vape Town se order karna easy raha aur product presentation achi thi.
Mian Usama
VOOPOO VMATE V4 ka refill design convenient hai. Product safely packed tha aur overall shopping experience acha raha.